• 1114
  • 5
  • 3
  • 0
  • Help Ukraine

Саморобний зарядний пристрій / Emergency Phone Charger

Shared by Carolina Piedade on 2022-04-07 19:34

About the solution

Це не потребує електрики!

Все, що вам знадобиться для цієї розробки, це...
1. Безпровідний дриль
2. Все, що ви можете знайти, щоб допомогти закріпити його на місці та розкрутити вручну.

Елементи:
* Шматок дерева 60х120
* Трохи пряжі
* 1 міксер
* 1 виделка
* Шматок фольги
* Трохи скотча

КРОКИ:
Крок 1. Вийміть акумулятор з бездротової дрилі та подивіться всередину. Ви повинні побачити 2 клеми, де батарея забезпечує живлення дрилі.
Крок 2: Використайте алюмінієву фольгу, щоб створити імпровізовані дроти, які підключаються до клем. (мідний дріт буде ще краще).
Крок 3: Закріпіть дриль на поверхні, як шматок 60х120, натиснувши на спусковий гачок. Я використовував багато пряжі, щоб міцно його тримав.
Крок 4: Вставте міксер у патрон дрилі та переконайтеся, що він затягнутий, щоб міксер не виходив.
Крок 5: Додайте вилку у міксер, щоб вона діяла як рукоятка, і під’єднайте кабель зарядного пристрою. Під'єднайте червоний провід до плюсового проводу, а чорний провід до мінусового.
Примітка: полярність МАЄ значення! Якщо ваша батарея не заряджається, ймовірно, ви змінили полярність. Ви можете або перемкнути проводи, або налаштувати дриль на зворотний хід і крутити в протилежному напрямку. Це змінить полярність, яку ви створюєте, і має вирішити проблему.

Дізнайтеся більше про кроки тут https://www.instructables.com/Steel-Wool-Emergency-Fire-Start
ВІДПОВІДАЛЬНІСТЬ: рішення не було попередньо перевірено, і ризик, пов’язаний із використанням, залишається на розсуд користувача
_________________________________

There's no charge for this electricity!

All you'll need for this project is...
1. A cordless drill
2. Anything you can find to help secure it in place and spin it by hand.

Parts:
* A piece of wood 2"x4"
* Some yarn
* 1 mixing beater
* 1 salad fork
* A piece of aluminum foil
* Some Scotch tape

STEPS:
Step 1: Remove the battery from the cordless drill and look up inside. You should see 2 terminals where the battery provides power to the drill.
Step 2: Use the aluminum foil to fashion make-shift wires that connect to the terminals. (Salvaged copper wire is even better if you can find some).
Step 3: Secure your drill to a surface like a piece of 2"x4" with the trigger pressed "on". I used plenty of yarn to hold it down tight.
Step 4: Insert the mixing beater into the drill chuck and make sure it's tightened so the beater won't come out.
Step 5: Add the salad fork through the mixing beater to act as a crank handle, and hook up your charger cable. Hook the red wire to the positive lead, and the black wire to the negative lead.

Learn more about the steps here https://www.instructables.com/Steel-Wool-Emergency-Fire-Starter/, where this solution was adapted
DISCLAIMER: the solution has not been previously validated and the risk incurred by using is at the user's discretion

This solution shall not include mention to the use of drugs, chemicals or biologicals (including food); invasive devices; offensive, commercial or inherently dangerous content. This solution was not medically validated. Proceed with caution! If you have any doubts, please consult with a health professional.

DISCLAIMER: This story was written by someone who is not the author of the solution, therefore please be advised that, although it was written with the utmost respect for the innovation and the innovator, there can be some incorrect statements. If you find any errors please contact the patient Innovation team via info@patient-innovation.com

About the author

By The King of Random at the Instructables
This solution is a part of the #PatientInnovationStandsWithUkraine Project. Find more related solutions on the page of this project.
Король випадкових в Instructables
Це рішення є частиною проекту #PatientInnovationStandsWithUkraine. Знайдіть більше рішень на сторінці цього проекту.

Tags associated to this solution

Like solution
Close en
Close