Patient Innovation

Press enter to start searching

  • 2670
  • 1
  • 1
  • 0
  • Help Ukraine

Paraplegic invents device to help reading on the wheelchair

Shared by Ana Duarte on 2017-05-11 15:14

About the solution

The board can be placed in two different positions:
- On user’s tights, with the shelf is titled by a flap mounted on hinges, with a slat at the front that prevents the book from slipping;
- On the armrests, allowing the user to regularly lift himself from his seats (this is important in order to avoid pressure sores) using the hands without removing the shelf. This is fixed on a wooden lath by means of two clamping blocks, pierced with a hole which allows to put them on the armrests. It can slide back and forth.

René used the following materials:
• Triplex plates 20 x 35 x 0.6 and 28 x 6.5 x 0.3 cm
• Wooden slats of 35 x 1.8 x 0.4 and 50 x 3 x 1 cm
• Wooden slats (for glue blocks) 10 x 3 x 1 cm
• Wooden blocks 4 x 6 x 5 cm
• Hinges, screws, glue.

Adapted from: http://bit.ly/2q6FeDb

This solution shall not include mention to the use of drugs, chemicals or biologicals (including food); invasive devices; offensive, commercial or inherently dangerous content. This solution was not medically validated. Proceed with caution! If you have any doubts, please consult with a health professional.

DISCLAIMER: This story was written by someone who is not the author of the solution, therefore please be advised that, although it was written with the utmost respect for the innovation and the innovator, there can be some incorrect statements. If you find any errors please contact the patient Innovation team via info@patient-innovation.com

About the author

René, from Belgium, is paraplegic. Because he wanted be able to read a book by himself, despite of his condition, he built a wooden board to hold his books while sitting on the wheelchair.

Tags associated to this solution

Like solution
Close en
Close

Welcome to Patient Innovation

Login with

Log in with Facebook

or

Forgot your password?

Not a member yet? Register now, it's free!