• 6547
  • 2
  • 1
  • 0
  • Help Ukraine

Wheelchair cart

Klaus Rausch 于 2016-06-21 11:57 分享

About the solution

Built by a local welder with standard tools (no high tech), with local material (~ 50 Euro, except the rear wheelchair wheels) and tested by a 9-year old double amputee. All, organized, bought, built and tested, in only 3 days.

I got a mail from Kenya about “developing a low-cost, foldable, off-road wheel chairs for disabled children in rural Africa” at spring 2015.

That is why I got the idea with the wheelbarrow. Well, investigating, I saw a photo of a wheelbarrow race in Kenia :)

I think that this wheelchair could fulfill more ore less those points:
– low-cost (a wheelbarrow isn’t to expensive and if necessary second hand wheelbarrows could be used)
– off-road (the front wheel using the one of the wheelbarrow, the rear wheels (Try to get used ones, incl. the mounts) should be using mountainbike tires . The tube of wheelbarrows normally is very strong and made of steel, what makes it weldable!)
– for children (that is is the main point, as it is needed to know for whom it is, then you can bend the frame exactly for the needs)
– foldable (I thought attachable, if foldable is very important, I guess it is possible, but more expensive!)

Anyway, I liked my idea :)

The Building itself is to be seen in 4 parts:

The 2 main side tubes are looking a bit like short stairs. We use the wheelbarrows frametubes, cut them and together with flat steel we welded the new main tubes of the wheelchair. Important: we need to build 2 equal main tubes! (With better planing we wouldn’t cut all in pieces, just cut angles to bend)
As we don’t know the exact horizontal position of the big rear wheels, next we built the adjustment system to adjust and attach the big rear wheels. (This could be done cheaper and easier, too)
The struts to connect the 2 main tubes. We bent/welded flat steel, one behind the backrest and one under the seat base. As last strut we used 2 square tubes as footrest.
The front wheel gallows and the finishing, like side protection and seating base. The big wheelbarrow wheel can pass the most hurdles. So we just had to made sure it gets pulled. As the wheel uses an outer lane, it helps the wheelchair not to fall easy, when it turns. A metal sheet othe wheelbarrow tub and flat steel is used as side protection. And as seating and backrest base we used a rope.

We tried to build everything parallel and with the right (mostly) 90° angles, but as we hadn't the equipment therefor, it was not very exact.

As the wheelchair just works with 3 wheels and the seating base is a rope, it doesn’t matter to much. The chair works fine.

More about at http://santa66.net/

https://www.youtube.com/watch?v=aLwWYJGidyw&feature=youtu.be

这些解决方案不应包括使用药物,化学品或生物制品(包括食品);创伤性设备;冒犯性的,商业或内在危险的内容。该解决方案未经医学验证。请谨慎进行!如果您有任何疑问,请咨询健康专家。

关于发明者

Klaus from http://santa66.net/ is a german and an incomplete paraplegic since 1997.

喜欢该发明
Close zh
Close