• 1216
  • 0
  • 1
  • 0
  • Help Ukraine

Саморобна лампа / Jug Lantern

Shared by Maria João Jacinto on 2022-03-04 12:53

About the solution

Необхідні елементи для лампи:
1 порожній пластиковий глечик (з-під води/молока тощо).
1 налобний ліхтар

Інструкція:
1) Промийте глечик для молока гарячою водою та зніміть етикетку.
2) Наповніть глечик водою.
3) Пристебніть налобний ліхтар до глечика, вказуючи на молочний глечик.
4) Увімкніть ліхтар, і у вас є лампа!

Ви можете знайти повну інструкцію тут https://diythrill.com/2018/05/11/diy-milk-jug-lantern/, звідки було адаптовано це рішення.
Це рішення є частиною проекту #PatientInnovationStandsWithUkraine. Знайдіть більше рішень на сторінці цього проекту.
ВІДПОВІДАЛЬНІСТЬ: рішення не було попередньо перевірено, і ризик, пов’язаний із використанням, залишається на розсуд користувача
______________________________________

Jug Lantern Supplies Needed:
1 Empty Gallon Plastic Milk Jug or Water Jug
1 Head Lamp

Instructions:
1) Wash out your milk jug with hot water, and remove the label.
2) Fill the milk jug up with water.
3) Strap your headlamp on to the jug, pointing into the milk jug.
4) Turn your headlamp on, and you’ve got a lantern!

You can find the comprehensible instructions here https://diythrill.com/2018/05/11/diy-milk-jug-lantern/, which is where this solution was adapted from.
This solution is a part of the #PatientInnovationStandsWithUkraine Project. Find more related solutions on the page of this project.
DISCLAIMER: the solution has not been previously validated and the risk incurred by using is at the user's discretion

This solution shall not include mention to the use of drugs, chemicals or biologicals (including food); invasive devices; offensive, commercial or inherently dangerous content. This solution was not medically validated. Proceed with caution! If you have any doubts, please consult with a health professional.

DISCLAIMER: This story was written by someone who is not the author of the solution, therefore please be advised that, although it was written with the utmost respect for the innovation and the innovator, there can be some incorrect statements. If you find any errors please contact the patient Innovation team via info@patient-innovation.com

About the author

DIY Thrill

Tags associated to this solution


        
Like solution
Close en
Close