- 5911
- 354
- 9
- 9
- 0
- Help Ukraine
About the solution
The inventor designed this product thinking of his mother, who uses one arm for all the daily tasks, which causes her remaining arm to be overworked.
“The objective is to make it easier to use a sweeper or mop. I achieved this objective to use a set of open rings with an handle to make it easier to use the sweeper or mop. So I created a set of supports that can be attached to normal broomstick to relieve the arm of some of the strain. The pictures are of the first prototype a few weeks ago. The inside corners of the rings have rounded edges to prevent blisters, scratches and cuts. The outside is curved to prevent stress-points in the material to prevent breaking. The blades of the rings are slightly tapered to have some flexibility in the top part to make getting in and out of the rings easier. Each part has holes to fit M3 bolts/screws with brass inserts with an Outside diameter of 4mm and a length of 12 mm for the rings and 10 for the handle”, Björn wrote.
The sizes of the rings are 50 mm broad 60 mm for the elbow piece, 40 mm broad 60x45 elliptical shape for the wrist piece.
The printing files are available online, costing $2.60.
Adapted from: http://bit.ly/2mflHwv
This solution shall not include mention to the use of drugs, chemicals or biologicals (including food); invasive devices; offensive, commercial or inherently dangerous content. This solution was not medically validated. Proceed with caution! If you have any doubts, please consult with a health professional.
DISCLAIMER: This story was written by someone who is not the author of the solution, therefore please be advised that, although it was written with the utmost respect for the innovation and the innovator, there can be some incorrect statements. If you find any errors please contact the patient Innovation team via info@patient-innovation.com
-
-
740
-
0
-
71829
Disabled guitarist invents plastic and leather finger tip covers to play the guitar
-
-
-
820
-
43
-
44390
Robohand - A 3D-printed thermoplastic mechanical hand
Physical disability
Amniotic band syndrome
Limb amputation
Limb traumatic amputation
Traumatic amputation
Hand
Arm
3D-printed device
Prosthesis
Working
Do housework (cleaning the house, etc.)
Grip
Studying
Limb Amputation
3d Printed
Body-Worn solutions (Clothing, accessories, shoes, sensors...)
Difficulty walking or moving
Joint deformity
Joint pain
Joint redness or warmth
Joint swelling
Limited range of motion
Reduced grip force (grip)
Restoring mobility
Replacing lost limbs
Promoting self-management
Managing Neurological Disorders
Promoting inclusivity and social integration
Recovering from Traumatic Injuries
To improve Treatment/Therapy
Neurology
Orthopedics
Pediatrics
Vascular Surgery
-
-
-
571
-
92
-
43381
Crutches with a built-in shock absorbing system
-